A customer from the automotive industry requires TISAX evidence. That comes with a requirements catalog, an audit provider and a result that remains valid for three years. CRISAM® maps the requirements, collects the answers from the people responsible in each department and exports the assessment.
As of 23 September 2026
| Non-conformity | Area | Rating | Status |
|---|---|---|---|
| Access rules for prototype shop not documented | Prototype protection | open | |
| Supplier requirements without evidence | Information security | in progress | |
| Deletion concept for test data open | Data protection | in progress | |
| Emergency planning for production documented | Availability | done |
TISAX stands for Trusted Information Security Assessment Exchange and is a system for the trusted exchange of information security assessment results. It is operated by the ENX Association. Assessments are carried out against the Information Security Assessment of the German Association of the Automotive Industry, VDA ISA for short. The result is not a certificate but a TISAX label that is valid for three years.
The trigger comes from outside: a partner requires evidence that your information security management meets the requirements of the Information Security Assessment. You then decide for yourself up to which level this partner may view your result.
The ENX Association describes the process as registration, assessment and exchange. In practice, decisions that determine the effort fall in between.
Information about the company and the assessment scope is entered in the ENX portal. The scope defines which locations and processes are assessed.
The assessment objectives determine the labels and the assessment level. Which assessment objectives are needed is usually specified by the partner requesting the evidence.
The requirements of the catalog are rated and backed with evidence. Internally, this step usually causes the most effort.
The assessment is carried out by an audit provider approved by the ENX Association. In the event of non-conformities, a corrective action plan and a follow-up assessment follow.
The result is shared via the ENX platform. You decide up to which level the partner gets access.
The assessment result is valid for three years. If you are still a supplier to your partner after that, it is renewed, and the process starts over.
TISAX is not a legal obligation. However, the automotive industry often makes it a prerequisite before passing information on to suppliers and service providers.
The labels cover four topic areas: confidentiality of information, availability, prototype protection and data protection. Each assessment objective comes with its own requirements. Anyone working with prototypes goes through a more extensive assessment than a pure data service provider.
At AL 2, the audit provider checks the self-assessment for plausibility, reviews evidence and conducts interviews, usually by web conference. At AL 3, this is supplemented by the review of documents, on-site interviews with process owners and the observation of conditions and procedures. Higher assessment levels include the lower ones.
TISAX does not issue a certificate, but labels for the assessment objectives achieved. They are not published, but shared specifically with the partners who requested the evidence.
The steps build on each other, and the result has to hold up for three years.
| Requirement | Basis | What is required | How to map it in CRISAM® |
|---|---|---|---|
| Registration and scope | ENX portal | Enter information about the company and the assessment scope. The scope defines which locations and processes are covered by the assessment | Company structures, locations and processes are mapped as a model. The assessment scope is linked to the same objects as the requirements. |
| Assessment objectives and labels | TISAX process | Define the assessment objectives that determine the labels: confidentiality of information, availability, prototype protection and data protection | The corresponding requirement area is activated for each assessment objective. The compliance status can be evaluated separately for each assessment objective. |
| Self-assessment based on VDA ISA | VDA ISA 6.0 | Rate every requirement in the catalog, justify the current state and attach the evidence | CRISAM® supports mapping and rating the requirements from VDA TISAX. Compliance gaps and non-conformities are identified transparently. |
| Involving the departments | Practice | The answers come from IT, HR, purchasing, development, production and facility management. Without their involvement, the self-assessment remains imprecise | Information can be collected from the people responsible in a targeted, decentralized way. This reduces the effort for baseline audits, reviews and supplier inquiries. |
| Non-conformities and corrective action plan | TISAX process | In the event of non-conformities, submit a corrective action plan and provide evidence of implementation by the follow-up assessment | Non-conformities become measures with an owner and a due date. The automotive security dashboards show compliance status, non-conformities and measures in one place. |
| Assessment by the audit provider | ENX Association | The assessment is carried out by an audit provider approved by the ENX Association. Depending on the assessment level, by web conference or on site | The required TISAX Information Security Assessment can be generated, exported and imported directly from CRISAM®, consistently and audit-ready. |
| Share the result | ENX platform | The assessment result is shared via the ENX platform. You define the level up to which a partner gets access | TISAX reports for audits and customer inquiries are available, as are export functions for assessments and audits. |
| Renewal after three years | TISAX process | The assessment result is valid for three years. After that, the process runs again, using the catalog valid at that time | Ratings, evidence and measures remain in the model. The renewal builds on the requirements already answered instead of starting from scratch. |
From the scope to the assessment for the audit provider.
Locations, processes, assessment objectives and assessment level are defined and justified. These decisions determine the scope of the assessment and the effort involved.
As a rule, the customer states which assessment objectives it expects. These determine the labels and the assessment level.
Prototypes increase the effortAnyone with prototypes, test vehicles or protected components on site has more to assess than a pure data service provider.
Locations individuallyEvery location in the scope is considered. Anything outside it is not part of the result.
The requirements catalog is rated for each assessment objective. This shows you where gaps exist: for which requirement, in which area and how far the current state is from the target.
| Requirement | Assessment objective | Actual | Target | Severity |
|---|---|---|---|---|
| Access to prototype shop and testing | Prototype protection | 1 | 4 | |
| Security requirements for suppliers | Supply chain | 1 | 4 | |
| Handling of image and video material | Prototype protection | 2 | 4 | |
| Deletion concept for test data | Data protection | 2 | 4 | |
| Emergency planning for production | Availability | 3 | 4 |
The knowledge you need sits in the departments, not in the security team. Queries go directly to the people responsible, and the answers are stored right with the respective requirement.
For each non-conformity, you create a measure with an owner and a due date. This list serves as the corrective action plan for the audit provider.
In the automotive industry, TISAX usually comes with additional frameworks. Thanks to the mapping, one answered control objective question counts for several frameworks.
| Control objective | TISAX | ISO 27001 | ISO/SAE 21434 | UN R 155 | IATF 16949 |
|---|---|---|---|---|---|
| Access rights by task | |||||
| Security requirements for suppliers | |||||
| Handling of security incidents | |||||
| Protection of development data | |||||
| Employee awareness | |||||
| Emergency and recovery planning |
The end result is the assessment the audit provider expects, including evidence and the corrective action plan. On the same basis, you also answer customer inquiries in day-to-day business.
| Document | Content | Version | Owner | Status |
|---|---|---|---|---|
| Scope description | Locations, processes, assessment objectives | 11.09.2026 | ISMS team | |
| Information Security Assessment | Rating of all requirements | 15.09.2026 | ISMS team | |
| Corrective action plan | Non-conformities with due date and owner | 15.09.2026 | ISMS team | |
| Evidence for prototype protection | Access, labeling, transport | under revision | Facility | |
| Evidence for supply chain | Contract clauses and responses | planned 11/2026 | Purchasing | |
| Approval for sharing | Level per partner | open | Management |
Scope, assessment objectives, approval for sharing with partners.
Rating based on VDA ISA, corrective action plan, support during the assessment.
Prototype protection, handling of image material, recovery.
Security requirements for suppliers, employee awareness.
In the automotive industry, it is rare for just one framework to apply. CRISAM® connects automotive security requirements with risk, compliance and audit processes in one platform and manages overlapping requirements through a shared model.
The integrated Automotive Knowledge Pack is based on VDA TISAX, UN R 155 and R 156, ISO/SAE 21434 and IATF 16949, among others.
The required TISAX Information Security Assessment is generated, exported and imported directly from CRISAM®, consistently and audit-ready.
Information can be collected directly from the people responsible. This reduces the effort for baseline audits, reviews and supplier inquiries.
The automotive extension is integrated with ISMS, data protection, ICS, audit and risk management. To learn how CRISAM® is used in the industry, see Automotive industry.
Both assess information security, but for different audiences. ISO/IEC 27001 leads to a certificate from an accredited certification body that you can show to anyone. TISAX leads to labels from the ENX Association that you share specifically with individual partners. An existing management system based on ISO/IEC 27001 covers many requirements of the VDA ISA, but does not replace the TISAX process.
| Criterion | TISAX | ISO/IEC 27001 |
|---|---|---|
| Governance | ENX Association, assessment catalog from the German Association of the Automotive Industry | International standard, certification by accredited bodies |
| Assessment basis | VDA Information Security Assessment, version 6.0 | ISO/IEC 27001:2022, German version DIN EN ISO/IEC 27001:2024-01 |
| Result | Labels for the assessment objectives achieved, explicitly not a certificate | Certificate for the defined scope |
| Visibility | Shared specifically with partners, you define the level | Can be shown freely, often published |
| Assessment scope | Determined by the scope and the selected assessment objectives, assessment level AL 2 or AL 3 | Determined by the scope and the risk assessment |
| Special topics | Prototype protection and data protection are separate assessment objectives | No dedicated prototype protection, data protection only indirectly |
| Validity | Three years, after which the process runs again | Three-year cycle with annual surveillance audits |
| Mapping in CRISAM® | Automotive Knowledge Pack with over 85 building blocks and more than 650 control objectives | ISMS Knowledge Pack with over 230 building blocks and more than 2,500 control objectives |
That is when the mapping pays off. In CRISAM®, one answered control objective question counts for both frameworks and does not have to be collected twice. What is already evidenced for ISO/IEC 27001 is available for the self-assessment based on VDA ISA. You can find an overview of all frameworks covered by CRISAM® under Standards and frameworks.
The first step depends on where you stand today.
You start with the scope and assessment objectives. The Automotive Knowledge Pack provides the matching requirements, and reviewed, reusable content is immediately available for the rating.
What matters is who answers. Instead of sending a file through several departments, queries go directly to the people responsible, and the answers are stored right with the respective requirement.
That means a large part of the work is already done. Thanks to the mapping, one answered control objective question counts for both frameworks. What remains open are the topics only TISAX covers, above all prototype protection.
For this you need the CRISAM® GRC Platform, the CRISAM® ISMS Module and the Automotive or TISAX Knowledge Pack. In the demo, we discuss your starting point and show what you already have in place.
TISAX stands for Trusted Information Security Assessment Exchange and is a system for the trusted exchange of information security assessment results. It is operated by the ENX Association. Assessments are carried out against the Information Security Assessment of the German Association of the Automotive Industry, VDA ISA for short. The result is not a certificate but a TISAX label that is valid for three years.
The ENX Association describes three steps: registration, assessment and exchange. During registration, information about the company and the assessment scope is entered in the ENX portal. The assessment is carried out by an approved audit provider; in the event of non-conformities, a corrective action plan and a follow-up assessment follow. You then share the result with your partners and define up to which level they get access.
Both assess information security, but for different audiences. ISO/IEC 27001 leads to a certificate from an accredited certification body that you can show to anyone. TISAX leads to labels from the ENX Association that you share specifically with individual partners. An existing management system based on ISO/IEC 27001 covers many requirements of the VDA ISA, but does not replace the TISAX process.
The labels cover four topic areas: confidentiality of information, availability, prototype protection and data protection. Which assessment objectives are needed is usually specified by the partner requesting the evidence. The assessment objectives determine the labels and the assessment level.
At AL 2, the audit provider checks the self-assessment for plausibility, reviews evidence and conducts interviews, usually by web conference. At AL 3, this is supplemented by the review of documents, on-site interviews with process owners and the observation of conditions and procedures. Higher assessment levels include the lower ones.
The assessment result is valid for three years. If you are still a supplier to your partner after that, it is renewed, and the process starts over. In CRISAM®, ratings, evidence and measures remain in the model, and the renewal builds on the requirements already answered.
What matters is whether the requirements catalog is included and whether the answers can be collected directly from the responsible departments. The integrated Automotive Knowledge Pack from CRISAM® provides over 85 building blocks and more than 650 control objectives, based on VDA TISAX, UN R 155 and R 156, ISO/SAE 21434 and IATF 16949, among others. The required TISAX Information Security Assessment can be generated, exported and imported directly from CRISAM®.
Yes. In addition to TISAX, requirements from UN R 155 and R 156, ISO/SAE 21434 and IATF 16949 can be mapped and evaluated in a structured way. Thanks to the mapping of control objective questions, one answer counts for several frameworks and does not have to be collected again for each framework. This is particularly relevant in complex supply chains and group structures.
The information on the TISAX process and the VDA ISA on this page comes from the following sources.
The information reflects the status of the sources listed as of the review date stated above.
In the demo, we walk through your case: scope, assessment objectives, rating based on VDA ISA, the queries to the departments and the export of the assessment.
You are currently viewing a placeholder content from Facebook. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Hubspot Embedded Content. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from HubSpot. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Hubspot Meetings. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Instagram. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from X. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information