How much time does your team spend on the quarterly report? In CRISAM®, analyses, dashboards and management reports are built from the same data. You design a report once and adapt it to each audience. Every number can be traced back to the individual risk.
| Risk | Value at Risk 95 | Change |
|---|---|---|
| Cyber incident in production control | 2.10M | ▲ |
| Commodity price volatility | 1.70M | ▼ |
| Failure of a key supplier | 1.20M | ▲ |
| USD to EUR exchange rate | 0.80M | ● |
| Delay in the approval process | 0.60M | new |
You report to the executive board, supervisory board, audit committee and business departments, directly from the system where the data already resides.
Why has this risk increased? What effect does the measure have? Who assessed it? If the answer is spread across several files, it is often not available until the next meeting.
The effort goes into formatting, not into the message.
You discuss decisions, not data versions.
The analysis methods of the CRISAM® method are built into the system. You neither have to develop them yourself nor justify them separately in the audit. Each analysis delivers a view that you can use directly in a dashboard or report.
How long can a process be down, and what does each day of downtime cost? The Business Impact Analysis answers this for every process, assessed by availability, integrity and confidentiality.
| Business process | Criticality | ① Protection requirements | ② Worst case | ③ IT services used |
|---|---|---|---|---|
| Product development | 2/3 elevated | 4 very high | €2.72M | 5 |
| Financial accounting | 2/3 elevated | 4 very high | €2.72M | 5 |
| Component assembly | 1/3 monitor | 4 very high | €2.40M | 3 |
| IT service | Criticality | ① Protection requirements | ② Largest single loss | ③ Dependent processes | Owner |
|---|---|---|---|---|---|
| BIS: SAP | 2/3 elevated | 4 very high | €2.72M | 2 | no owner |
| BIS: Email | 2/3 elevated | 4 very high | €2.72M | 2 | no owner |
| BIS: Time tracking (in-house development) | 2/3 elevated | 4 very high | €2.40M | 1 | no owner |
| BIS: Cloud development | 2/3 elevated | 4 very high | €2.13M | 1 | no owner |
| BIS: Telephony | 2/3 elevated | 4 very high | €2.12M | 2 | no owner |
| BIS: Document archiving | 2/3 elevated | 4 very high | €2.10M | 1 | no owner |
| BIS: Office | 2/3 elevated | 4 very high | €1.50M | 3 | no owner |
| BIS: Project planning | 1/3 monitor | 3 high | €1.24M | 1 | no owner |
| fewer than 5 processes | Grand total | |
|---|---|---|
| 4 very high | 7 | 7 |
| 3 high | 1 | 1 |
| Grand total | 8 | 8 |
| 5 or more IT services | fewer than 5 IT services | Grand total | |
|---|---|---|---|
| 4 very high | 2 | 1 | 3 |
| Grand total | 2 | 1 | 3 |
| IT service | Dependent processes | Largest single loss | Protection requirements (max.) | Owner |
|---|---|---|---|---|
| BIS: Office | €1.50M | 4 | no owner | |
| BIS: Telephony | €2.12M | 4 | no owner | |
| BIS: SAP | €2.72M | 4 | no owner | |
| BIS: Email | €2.72M | 4 | no owner | |
| BIS: Time tracking (in-house development) | €2.40M | 4 | no owner | |
| BIS: Cloud development | €2.13M | 4 | no owner | |
| BIS: Project planning | €1.24M | 3 | no owner | |
| BIS: Document archiving | €2.10M | 4 | no owner |
| IT service | Processes | Confidentiality | Integrity | Availability | Legal compliance | Largest single loss |
|---|---|---|---|---|---|---|
| BIS: SAP | 2 | 4 very high | 4 very high | 4 very high | 2 medium | €2.72M |
| BIS: Email | 2 | 4 very high | 4 very high | 2 medium | 3 high | €2.72M |
| BIS: Time tracking (in-house development) | 1 | 3 high | 4 very high | 2 medium | 2 medium | €2.40M |
| BIS: Cloud development | 1 | 4 very high | 2 medium | 1 low | 1 low | €2.13M |
| BIS: Telephony | 2 | 4 very high | 0 negligible | 1 low | 2 medium | €2.12M |
| BIS: Document archiving | 1 | 4 very high | 4 very high | 3 high | 3 high | €2.10M |
| BIS: Office | 3 | 4 very high | 2 medium | 3 high | 3 high | €1.50M |
| BIS: Project planning | 1 | 3 high | 3 high | 0 negligible | 0 negligible | €1.24M |
Each measure and its cost are compared with the risk it reduces. By comparing gross and net risk, you see immediately where your budget has the greatest effect.
| Measure | One-time | Recurring p.a. | Risk reduction |
|---|---|---|---|
| Hedging with forward contracts | 180.000 € | 64.000 € | −€2.4M |
| Network segregation in production | 310.000 € | 72.000 € | −€0.9M |
| Qualify a second supplier | 95.000 € | 28.000 € | −€1.1M |
| Derivative financial instruments | 40.000 € | 22.000 € | −€0.4M |
| Early coordination with authorities | 25.000 € | 12.000 € | −€0.3M |
| Extend inventory coverage | 130.000 € | 40.000 € | −€0.2M |
| Total | 780.000 € | 238.000 € | −€5.3M |
How does the result change if the commodity price rises by ten percent? The Sensitivity Analysis ranks your drivers by their effect, starting with the strongest.
| Commodity price | −20 % | −10 % | Plan | +10 % | +20 % |
|---|---|---|---|---|---|
| EBIT | 43,6 | 39,8 | 36,0 | 31,9 | 27,6 |
| Deviation from plan | +7,6 | +3,8 | 0,0 | −4,1 | −8,4 |
The target-actual comparison with a standard shows where you stand and where the biggest gaps are. In the ISO/IEC 27001:2022 example, you see this per topic area and per control objective.
| Risk object | Building block category | Building block | Status | Actual | Target | Deviation | Sensitivity | Measures | |
|---|---|---|---|---|---|---|---|---|---|
| User policies | IT organization | User policies | In progress | C- | B | Minor deviation | 5,73 % | 1 | |
| APP: Time tracking application | Applications | Custom development | Not updated | F | B | Major deviation | 3,31 % | 0 | |
| VMware Cluster | Servers | Virtual server | Not updated | C | B | Minor deviation | 3,23 % | 1 | |
| Router/Switch | Networks | Router/Switch | Not updated | C- | B | Minor deviation | 2,85 % | 2 | |
| Identity Management System | Directories | Identity Management System | Not updated | E | B | Major deviation | 2,84 % | 0 | |
| Firewall 1 | Networks | Firewall | Not updated | C | B | Minor deviation | 2,84 % | 3 | |
| Firewall 2 | Networks | Firewall | Not updated | C+ | B | Minor deviation | 2,71 % | 3 |
The risk matrix shows the number of gross and net risks for each cell. The effect of the measures becomes visible when you compare the two values.
| Class | Gross | Net |
|---|---|---|
| Risk class 1 | 1 | 2 |
| Risk class 2 | 22 | 24 |
| Risk class 3 | 7 | 4 |
| Risk class 4 | 0 | 0 |
| Total | 30 | 30 |
| Moved out of class 3 | 3 |
| New in classes 1 and 2 | 3 |
How far along is your organization with a standard or regulation? The Compliance Valuation shows the compliance level per requirement and its development across assessment periods.
| NIS-2 requirement, Art. 21(2) | Compliance level | Trend | Open | |
|---|---|---|---|---|
| a) Risk analysis and information system security | 78 % | 3 | ||
| b) Incident handling | 64 % | 3 | ||
| c) Business continuity and crisis management | 58 % | 4 | ||
| d) Supply chain security | 52 % | 3 | ||
| e) Security in acquisition, development and maintenance | 61 % | 2 | ||
| f) Assessing the effectiveness of measures | 70 % | 1 | ||
| g) Cyber hygiene and training | 81 % | 1 | ||
| h) Cryptography and encryption | 74 % | 0 | ||
| i) Human resources security, access control, asset management | 69 % | 2 | ||
| j) Multi-factor authentication and secured communications | 66 % | 0 | ||
| Total | 67 % | 19 |
Instead of a single planned figure, you see the range of possible outcomes. The Scenario Analysis simulates how your risks affect the planned result for each year of the mid-term plan.
| Element name (values in EUR) | Period | Gross:Net | P05 | Mean | P95 | P99 | Std. dev. |
|---|---|---|---|---|---|---|---|
| ⌕ Filter … | |||||||
| Risk Group AG | 2025 | Gross | 3.872.053 | 11.617.430 | 20.937.644 | 25.323.076 | 5.291.993 |
| Risk Group AG | 2025 | Net | 733.581 | 6.359.081 | 12.911.141 | 15.578.779 | 3.652.368 |
| Risk Group AG | 2026 | Gross | 2.808.021 | 11.310.904 | 20.753.587 | 24.910.165 | 5.420.550 |
| Risk Group AG | 2026 | Net | 635.811 | 6.154.172 | 12.517.138 | 15.303.537 | 3.619.406 |
| Risk Group AG | 2027 | Gross | 2.955.513 | 11.502.186 | 21.113.005 | 25.352.660 | 5.477.155 |
| Risk Group AG | 2027 | Net | 792.177 | 6.408.442 | 12.839.022 | 15.490.538 | 3.634.853 |
| Liquidity AT | 2025 | Gross | 0 | 2.867.226 | 6.293.329 | 6.728.246 | 2.569.005 |
| Liquidity AT | 2025 | Net | 0 | 471.465 | 1.749.162 | 5.132.731 | 1.086.399 |
A major loss rarely has just one cause. The Fault Tree Analysis breaks it down into individual events and shows where a measure has the greatest effect.
| Company | Name |
|---|---|
| Risk AG (ISMS) | APP: Office application |
| Risk AG (ISMS) | APP: Project planning web application |
| Risk AG (ISMS) | APP: SAP application |
| Risk AG (ISMS) | APP: Cloud development |
| Risk AG (ISMS) | APP: Time tracking application |
| Risk AG (ISMS) | Architecture Management |
| Processor Marketing GmbH | |
| Risk AG (ISMS) | Availability Management |
| Risk AG (ISMS) | Backup |
| Risk AG (ISMS) | Backup Storage |
| Bank details and billing information | |
| Risk AG (ISMS) | Component assembly |
| Behavioral Data | |
| Risk AG Austria (data protection) | Procurement management |
| Employee data |
Executive board, auditors and business departments ask different questions. Here you will find all analyses in CRISAM®, organized by the question each one answers.
In classes, in euros or as a distribution, depending on the available data.
One consistent scheme and one scale for all units.
Derive the distribution from historical values instead of estimating it.
Calculates the range of possible outcomes, for example for EBIT.
Combine individual risks into the overall risk position.
Which outcomes are realistic in relation to the plan.
Play through extreme assumptions and review earlier assessments.
Which driver has the strongest effect.
Which combination of causes leads to the loss.
Causes, event and consequences in one view.
Capture threats to systems and information in a structured way.
What an outage costs per process.
Which measure pays off.
Which risks take priority.
Where target and actual diverge.
Compliance level per framework.
The AI features are built into the workflows. They suggest measures for recorded risks, point out risks you should analyze in context, recommend controls and analyze supplier risks.
More about AI Risk IntelligenceIn the Dashboard Designer, you arrange widgets and filter them by business unit or risk category. The executive board sees the top risks, internal audit sees the open findings, both based on the same data set.
| Cyber incident in production | ▲ |
| Commodity prices | ▼ |
| Key supplier | ▲ |
| USD exchange rate | ● |
| EBIT plan | 36,0 |
| Risk-adjusted EBIT | 28,9 |
| Value at Risk 95 | 21,8 |
Arrows show what has risen, fallen or is new since the last reporting cycle.
Completed, ongoing and overdue measures at a glance.
EBIT plan, risk-adjusted EBIT and Value at Risk from the Scenario Analysis, in the same cockpit as the top risks.
Show the risk situation across several assessment periods. This lets you see developments instead of just snapshots.
Control coverage and the development of control effectiveness, from the internal control system.
Broken down by age, owner and severity. This makes visible what is being left undone.
| Name | Trend | Expected value | Value at Risk |
|---|---|---|---|
| Liquidity AT | 2.91M | 6.31M | |
| Result AT | 368K | 661K | |
| Cashflow at Risk | 50.1M | 50.1M | |
| EBIT DE | 49.9K | 501K | |
| Financial result DE | 14.5K | 111K | |
| EBIT plan value | 30M | 30M |
| Risk | Expected value | Value at Risk | Status |
|---|---|---|---|
| Brand and product piracy | 49.8K | 501K | Occurred |
| Change in temporary employment law | 420K | 2.71M | In progress |
| Compliance incident | 46.4K | 0 | Updated |
| Reputational damage due to misconduct | 1.97M | 8.28M | New |
| Delivery delays | 3.32K | 30.9K | New |
| USD/EUR exchange rate risk | 21.6K | 31.3K | New |
| Owner | Measures |
|---|---|
| – | 24 |
| Name | Priority | Investment costs | Operating costs | Start | End | Status |
|---|---|---|---|---|---|---|
| Define user policy | High | 0 | 0 | Not started | ||
| Implement application changes | Normal | 0 | 10K | Deferred | ||
| Implement structural measures | High | 10K | 7.5K | Q2 2026 | Q2 2027 | In progress |
| Revise user rights management | Normal | 3K | 1K | Q3 2026 | Q3 2027 | In progress |
| Improve change management | Normal | 0 | 10K | Q4 2025 | Q3 2026 | Completed✓ |
| Increase Citrix security | Low | 0 | 4K | Q2 2026 | Q3 2026 | In progress |
| Expand configuration management | Normal | 0 | 5K | Q2 2025 | Q1 2026 | Completed✓ |
| Improve firewalling | Normal | 0 | 1.3K | Q3 2026 | Q1 2027 | In progress |
| Conduct regular security audits | Normal | 0 | 25K | Q4 2026 | Q4 2028 | In progress |
| Implement SAP concept | Normal | 14K | 5K | Q1 2026 | Q3 2026 | In progress |
| Expand server room infrastructure | Low | 70K | 7K | Q2 2026 | Q2 2027 | Not started |
| Introduce service continuity management | Normal | 0 | 6K | Q4 2025 | Q2 2026 | Completed✓ |
| Improve service desk quality | Normal | 0 | 15K | Q3 2025 | Q1 2026 | Completed✓ |
| Name | Status | Due on | Type |
|---|---|---|---|
| [Datenpanne] 20.12.2026 | New | 27 Dec 2026 | Task |
| Approve document | Approved | 5 Dec 2026 | Task |
| Update Business Impact Analysis “Product development 2026” | New | 23 Dec 2026 | Task |
| Update measure status “Server hardware and software” | In progress | 23 Dec 2026 | Task |
| New workflow | New | 6 Dec 2026 | Task |
| RA Data protection management | Completed✓ | 20 Dec 2026 | Task |
| Risk assessment “RA Server Hardware 2026” | New | 31 Dec 2026 | Task |
| Effectiveness of the measure “Server hardware and software” | New | 1 Mar 2027 | Control |
In the Report Designer, you define the structure and layout of your management reports. After that, every report is generated from the current data set, with the same structure as in the previous quarter.
You define the cover page, management summary, top risks and measures. You drag tables, charts and key figures from the toolbar onto the page.
The supervisory board gets the condensed view, the business unit gets the details. Content and layout stay consistent.
In the preview, you see the finished report with current figures and export it for the meeting.
Planned equity and free liquidity, adjusted for risk impacts. 95% of the risk scenarios are covered (Value at Risk 95).
What specifically changes for risk owners when reporting with CRISAM®.
Analyses, dashboards and reports access the same data model. Diverging versions in individual presentations are a thing of the past.
Every total can be traced back to the individual risk, with assessment, owner and measure, including for past periods.
You define structure and layout in the Report Designer. In every reporting cycle, the same template is filled with the current data set. Nobody has to retype numbers anymore.
Role-based cockpits show each role, from the risk owner to the supervisory board, the information it needs for its decisions.
Early risk indicators, risk-bearing capacity thresholds and change indicators make changes visible before they show up in the report.
You configure new key figures, widgets or report sections yourself, without an IT ticket and without additional consulting days.
Good reports require clean data. You adapt the data model, forms and catalogs yourself so that all evaluations use the same terms.
| Name | Web | Current dashboard | Dashboard | Current reporting | Reporting |
|---|---|---|---|---|---|
| FY 2025 | |||||
| FY 2026 | |||||
| FY 2027 | |||||
| FY 2028 | |||||
| FY 2029 to 2031 |
| Required field | Owner |
| Validation rule | Loss > 0 |
| Condition | only for type Event |
Maps risk types, categories, business units, processes, objectives and assets the way your company is structured.
Adapts input screens per risk type, process step or role, with validation rules, conditional logic and help texts.
Causes, impacts, controls and business units come from maintained lists. This reduces free text and ensures clean evaluations.
Collects assessments and confirmations from many participants at the same time via questionnaires.
Any number of time slices, such as the current year and the mid-term plan. You define which of them appear in the dashboard and in the report.
Aggregates risks by business unit, objective or risk category, without side calculations in Excel.
Show in dashboards and reports how a risk has developed compared with the previous period.
Management reports and exports are created in the same designer, directly from the preview.
Each role gets the level of detail it needs for its decisions. How a number came about is traceable for everyone.
You see your risks, controls and measures with status and due date. What has changed since the last assessment is highlighted.
You monitor risk-bearing capacity and top risks, compare assessment periods and generate the management reports from the system.
You receive prioritized top risks, changes and the implementation status, monthly, quarterly or as needed. The audit committee additionally receives reports on the trend and age of open findings.
The calculation paths are built in and documented. How CRISAM® assesses and aggregates risks is described in the CRISAM® method.
Freely combinable in dashboards and reports.
Qualitative and quantitative, gross and net.
Traceable for auditors and supervisory authorities.
How companies build their risk picture with CRISAM®.
Reporting in CRISAM® comprises analyses, dashboards and reports based on a shared data model. The eight analysis methods of the CRISAM® method are built in, from the Business Impact Analysis to the Fault Tree Analysis, along with Monte Carlo simulation, aggregation modeling, stress tests and AI Risk Intelligence. With the Dashboard Designer and the Report Designer, you assemble cockpits and management reports yourself, for risk owners as well as for the executive board and supervisory board.
For assessment: qualitative, quantitative and stochastic assessment, rating model and distribution fitting. For aggregation: Monte Carlo simulation, aggregation modeling, Scenario Analysis, stress tests and backtesting, and Sensitivity Analysis. For causes and consequences: Fault Tree Analysis, bow-tie analysis, threat modeling and Business Impact Analysis. For decisions: Cost-Benefit Analysis, Portfolio Analysis, Gap Analysis and compliance analysis. New is AI Risk Intelligence, which suggests measures, risks and controls and analyzes supplier risks.
A dashboard shows the current state of the portfolio with early risk indicators, measure status and top risks and can be filtered by business unit or risk category. A report is a structured management report with a fixed structure that you generate and export for each reporting cycle.
Yes. In the Report Designer, you define the structure and layout of your reports yourself, and in the Dashboard Designer the widgets per role. You also configure the data model, forms and catalogs without programming.
Through risk-bearing capacity. You define thresholds, and dashboards show the utilization and every breach. Change indicators make visible how risks have developed compared with the previous period.
Yes. Because all data resides in one model, top risks, control coverage and control effectiveness, and open audit findings appear side by side in one dashboard or report.
As many as you like. Typical are the current year, the mid-term plan and a strategic horizon. For each time slice, you define whether it appears in the dashboard and in reporting.
Bring your current risk report. A GRC expert will show you how analyses, dashboards and reports in CRISAM® are created from one shared data set.
You are currently viewing a placeholder content from Facebook. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Hubspot Embedded Content. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from HubSpot. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Hubspot Meetings. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Instagram. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from X. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information